Description
Note:
1.The price is only Led strip, Not Included power cupply or Led controller!
2.WS2815 must use DC12V power supply and Led controller to control!
3.Every 0.5meter with solder joints, please note!
Main feature:
(1)One pixel damaged will not affect the other LEDs working.
(2)The power protection,if +12V and GND reverse polarity,the LED will not be burned.
(3) Dual signal wires version, signal can jump to transfer.
(4)The original electronic devices integrated,it does not cause virtual welding in the installation process.
LED description:
1.LED light: WS2815 LEDs(same protocol as WS2813S with Dual-signal wires,so can be controlled by the same WS2811/ws2812 controllers)
2.IC Type:improved version ws2815 IC(built inside the 5050 smd rgb led)
3.of IC:1 IC drives 1 led chip
4.LED resource:WS2815 led(5050 SMD RGB LED with built-in improved version of ws2811 ic)
5.LED:each LED is separately controlled
6.Cuttable:every LED is cuttable
Product Parameters:
1.FPC color:White PCB、blackPCB
2.Input voltage:DC12V;
3.Pitch:16.6mm(1000/64)
4.Grey scale:256
5.Bits/color:8-bits/color;
6.working temperature：-40 ~ 70 °C
7.Storage temperature：-50 ~ 80 °C
8.Colors: Full color RGB, dream color changing;
9.Protection：IP30/ IP65 /IP67(IP30 IP65 with 3M adhensive,IP67 without 3M adhensive)
10.Connector：4PIN connector terminal pair
(Red: 12V power , green: Date line, Blue: standby date line,Black: GND)
11.Pixels:30/60/144/meter
FPC Width:30leds/m----10mm
60leds/m----10mm
144leds/m----12mm
Power:30leds/m----9watt/meter
60leds/m----18watt/meter
144leds/m----43.2watt/meter
