Description

EP-5A EN-EL14 Fake Battery USB Type C USB-PD Converter To DC Cable For Nikon P7000 P7800 D5500 D5600 D3300 D3400 D5100 D5300

Specifications

Model: TC8V + EP-5A

Input: PD 18W-65W

Output: DC 9V

Length: 120cm

Package Includes:

1 x PD Cable

1 x DC Coupler

1 x Manual

Work for:

For NIKON D3100

For NIKON D3200

For NIKON D3300

For NIKON D3400

For NIKON D5100

For NIKON D5200

For NIKON D5300

For NIKON D5500

For NIKON P7000

For NIKON P7100

For NIKON P7700

For NIKON P7800

Important!

Please note that with some cameras, closing the camera battery door is a necessary step to use the DC adapter kit. Please refer to our operation manual for the installation example of the dummy battery.

Advantage:

1. High-quality chips,DC-DC converter,high conversion efficiency,Good stability,quiescent current is small,while also serving to effectively suppress harmonic current noise.Using a wide range,suitable for most 7.2V-8.4V and 9V camera.

2. The Camera PD-BX Convertor can't only play the role of power adapter,The convertor integrates 2 chips, one is used to identify PD and QC3.0/4.0 power, The other is used for 9V-24V wide voltage input, After the step-down treatment, the regulated output can effectively prevent high voltage, high current, and prevent short circuit, so it has multiple protection functions.

3. Compared with the ordinary USB Type-A (USB-A) power supply, the USB Type-C (USB-C) input PD power mode will get more power. Don't worry about the power bank will disconnect the power supply when the camera sleeps Output. If you use a Ordinary USB-A power supply,The camera will not be able to shoot at any time, when the camera is in smart sleep mode or standby mode, the Power bank usually disconnects the power output after one minute, which will miss the snapshot.

4. Replace the camera battery handle grip or carry more batteries,camera insert battery grip will too heavy,is not conducive to taking pictures.

5. After connecting to the correct PD and QC3.0/4.0 power adapter or power bank, the red indicator light will always be on when the power is on. Certain models of cameras may consume higher current, so please use a high-performance power supply.