Description

The main features

- average current control, two-phase sinusoidal current drive output

- DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator

- optically isolated signal input / output

- overvoltage, undervoltage, overcurrent, and white short-circuit protection

- Input voltage DC 12 ~ 48V input

- The input current of 1 to 5 amps, select the drive a stepper motor.

- Output current of 0.2A ~ 4A

- Temperature Operating Temperature -10 to 45 Degrees Celsius; Storage temperature -40 Degrees Celsius to 70 Degrees Celsius.

- Humidity not condensing, not drops

- Gas prohibit combustible gas and conductive dust

* the power interface

- 1, DC +, DC-: to connect the drive power

- DC +: DC power level, power supply voltage DC 12 to 48V. The maximum current is 4A. The DC-: DC power supply negative level.

- 2, A + A-B + B-: to connect the two-phase hybrid stepping motor

- Drive and two-phase hybrid stepper motor's connection with the four-wire system, the motor windings in parallel and series connection, and connection method, high-speed performance, but the drive current is large (for motor winding current of 1.73 times), Connected in series when the drive current is equal to the motor winding current.

* the installation

- Around to have 20mm of space, can not be placed next to the other heating equipment, to avoid dust, oil mist, Corrosive gases, high humidity is too big and strong vibration.

* the status light indicates

RUN: green light in the normal work.

ERR: red light, power, light, power indicator

Package include:

1Pc Stepper Motor Driver