Description

USB Type-C Charger Cable+PD Charger+DMW-DCC11 BLG10 BLE9 Dummy Battery For Lumix GF5 GF6 GX80 GX85 GX86CGK GX7 Mark II ZS60 TZ85

Model: TC8V-PD + DCC11

Package includes:

1 x QC USB Type-C Charger

1 x QC USB Type-C Cable

1 x Dummy Battery (DCC11 )

Compatible With Digital Camera Models:

For Lumix DMC-GF3

For Lumix DMC-GF3C

For Lumix DMC-GF3K

For Lumix DMC-GF3W

For Lumix DMC-GF5

For Lumix DMC-GF6

For Lumix DMC-GF6K

For Lumix DMC-GF6R

For Lumix DMC-GF6T

For Lumix DMC-GF6W

For Lumix DMC-GF6X

For Lumix DMC-GX7

For Lumix DMC-GX7K

For Lumix DMC-GX80

For Lumix DMC-GX85

For Lumix DMC-LX100

For Lumix DMC-LX100K

For Lumix DMC-LX100S

For Lumix DMC-S6

For Lumix DMC-ZS60

For Lumix DMC-ZS70

For Lumix DMC-ZS80

For Lumix DMC-ZS100

For Lumix DMC-ZS110

For Lumix DMC-ZS200

For Lumix DMC-TX1

For Lumix DMC-TZ100

For Lumix DMC-TZ101

For Lumix DMC-TZ80

For Lumix DMC-TZ81

For Lumix DMC-TZ85

For Lumix DC-ZS70

For Lumix DC-ZS80

For Lumix DC-ZS200

For Lumix DC-GX9

For Lumix DC-G100

For Lumix DC-LX100 II

And more models.

Important!

Please note that with some cameras, closing the camera battery door is a necessary step to use the DC adapter kit. Please refer to our operation manual for the installation example of the dummy battery.

Advantage:

1. High-quality chips,DC-DC converter,high conversion efficiency,Good stability,quiescent current is small,while also serving to effectively suppress harmonic current noise.Using a wide range,suitable for most 7.2V-8.4V and 9V camera.

2. The Camera PD-BX Convertor can't only play the role of power adapter,The convertor integrates 2 chips, one is used to identify PD and QC3.0/4.0 power, The other is used for 9V-24V wide voltage input, After the step-down treatment, the regulated output can effectively prevent high voltage, high current, and prevent short circuit, so it has multiple protection functions.

3. Compared with the ordinary USB Type-A (USB-A) power supply, the USB Type-C (USB-C) input PD power mode will get more power. Don't worry about the power bank will disconnect the power supply when the camera sleeps Output. If you use a Ordinary USB-A power supply,The camera will not be able to shoot at any time, when the camera is in smart sleep mode or standby mode, the Power bank usually disconnects the power output after one minute, which will miss the snapshot.

4. Replace the camera battery handle grip or carry more batteries,camera insert battery grip will too heavy,is not conducive to taking pictures.

5. After connecting to the correct PD and QC3.0/4.0 power adapter or power bank, the red indicator light will always be on when the power is on. Certain models of cameras may consume higher current, so please use a high-performance power supply.

VERY IMPORTANT:

The power of the mobile phone PD charger must be between 18W -65W, The camera can start normally. Only support 18W 30W 45W 60W 65W PD Wall charger / PD mobile power supply / PD Car charger to power the camera, please do not use other devices, otherwise the camera will be damaged. This device is only used to power the camera, Do not connect other devices at the same time, Otherwise, it will cause insufficient power supply.