Suitable for 7MM diameter glue sticks, this 7mm strip

Product Name: Hot melt glue gun

Product packaging: blister packaging

Product weight: 130 grams

Product size: length 13.5* width 11*2 cm

Packing size: length 19.5* width 15.5*6 cm

Packing quantity: 24 pieces / box 96 pieces / piece

The whole size: 42*40.5*66 cm

[Applicable] Toy models, artificial flowers, Christmas trees, decorations, metal products, wood products, cardboard, bonding of electronic circuit boards, etc...

[Specification] The gun length is 120mm (use a fine glue stick with a diameter of 7-7.5mm)

[Features]

[color] sapphire blue

1. This product uses high-tech ceramic PTC thermistor as the heating element, and the heating speed is fast. The PTC thermistor is automatically thermostated, and the temperature does not rise when it rises to the design temperature of the glue stick, which can prevent the damage caused by the heating body to the glue gun, save energy and achieve the purpose of prolonging the service life.

2. The electrical insulation strength of this product does not breakdown when energized at 3750V/min. It can be used normally in AC or DC power supply between 100V and 240V. It is not limited by voltage fluctuations. Built-in safety fuse is safer to use.

[Instructions]1. This series of products can be used with strips with a diameter of 7-7.5mm.2. Insert the strip from the end of the glue gun, send it to the barrel, and plug it in for 5-8 minutes. The trigger can be used to extrude the sol and control the amount of glue.3. In the process of use, if you can't use one strip at a time, the strip does not need to be taken out. You can plug it in the power supply for 5-8 minutes and use it directly.