RX MULTI 300MHz-868MHz Receiver

Specifications

1，Name: RX-MULTI receiver2，Voltage: AC/DC 9V-30V3，Channels: 24，Frequency: 300MHz - 868MHz5，Code: Rolling and Fixed & Learning Code6，Distance: 50m-100m7，Size: 56mm*46mm*20mm.8，One receiver can work with 400 remote control.9，It don’t interference other remotes and receivers.10，Brand selector: With 8 dip switches user can make different combination for different remote brands.11，Uses: Receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment, gateways, lifting devices. This is an easy to use, good looking, low power consumption and is easy to connect to your existing system.12，Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it’s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.

Features

Working Frequency: 300MHz-868MHz(Rolling Code and Fixed Code)300MHz310MHz315MHz318MHz390MHz433.4MHz433MHz433.92MHz868MHz868.3MHz868.8MHzCan identify ALL Fixed Code (2262, 2260, 2264, 5326, M1E, M5E and so on). All Learning Code (1527, 2240, 6P20B, 6P20D and so on), Rolling Code (HCS301, HCS300, HCS200, HCS201, HCS100, HCS101)and many other main brands in the market.

Include

ReceiverSmall AntennaEnglish Manual

Programming a new remote

1, Brand selector: With 8 dip switches user can make different combination for different remote brands. 2, Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it is better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2 and 3; shorten 1and 2 if input less than 24V. 3, Programming procedure: 1) Select the correct brand for remote to be programmed by moving dip switches UP or DOWN. For 433,92Mhz Beninca remote controls, just move Dip-switch 5 UP. ( Contains manual) 2) Press the learn button. The will LED turn on. 3) Press the button on the remote, the LED flashes 4 times. It means that remote control was programmed successfully. 4) Repeat step 2 for another button. 4. The 2-nd channel programming procedure is the same. 4. Erase all data from the memory card: Press and hold either learn button. The LED will start flash. Keep this button pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered

1. Are you a manufacture ?

We are the largest garage door remote control manufacturer in China, we can produce any brand remote control for you, including original remote control

2. I am a wholesaler, we need a remote control with a price advantage

No problem, our factory has officially settled in AliExpress, welcome to consult, we will give you the best price and best products

3. What brands of remote controls do you still produce?

We are the largest factory, so you can contact me directly if you need any brand remote control.

4. Can I place a large order? Can it be customized

of course

5.Do you support drop shipping

Support, we have cooperated with many friends, our packaging will not reveal any information, and the chip will not print text, we only provide products and instructions for use