Features:

100% brand new and high quality.The biggest highlight of this product is the delay function.

Time delay mode: Push the remote control button, the relay connects, from when release the remote button, after 5s or 10s or 15s, the relay disconnect automatically.

1 working voltage:DC12V/24V ±10%

2 working current: ≤10A

3.Static current: ≤10m

Operating temperature: -10~+70 ℃

Reception sensitivity: -105 DBM

6 operating frequency:433MHZ

7.Receiver Board Size: 55×37×21.5mm

8.Working mode: Momentary, Toggle, Latched Time delay (5s ,10s ,15s )

Encoding Type: Learning Code

Add transmitter by the Learning Button on the receiverLearning the code: ( Momentary )

- Push the learning key on the receiver once time, it comes into momentary setting mode.

- Wait for a moment, the LED will be off , it comes into learning state.

- Push the remote button, LED indicator on the receiver board will flash then come off.

- After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the code: ( Toggle )

- Push the learning key on the receiver twice time, it comes into toggle setting mode.

- Wait for a moment , the LED will be off, it comes into learning state.

- Push the remote button, LED indicator on the receiver board will flash then come off.

- After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the code:( Latched )

Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learnt is for "ON", the second time learnt for "OFF".

For example: button A = ON , button B = OFF

- Push the learning key on the receiver triple time, it comes into latching mode .

- Wait for a moment, the LED indicator on the receiver board will flash then come off.

- Push the remote button A.

LED flash for 5 times.

- Push the remote button B.

Led flash for 5 times.

- After 3 seconds, the LED indicator will be on again, learning successfully.

A = ON, B = OFF.

Learning the code: ( Time delay mode )

- Push the learning key on the receiver forth time, the time dealy for 5 seconds.

- Push the learning key on the receiver fifth time, the time delay for 10 seconds.

- Push the learning key on the receiver sixth time, the time delay for 15 seconds.

The LED indicator will be off.

- Push the remote button , LED flashes and off .

- After 3 seconds, the LED indicator will be on again, learning successfully.

NOTE: The system can store for 12 pcs of remotes, if the remote get more than 12pcs, the initial remote control will be lost.

Clearing Code:

Keeping press the learning button 8 seconds until the LED indicator light blinks several times and then goes out,, It mean the code have been cleared successfully.

pacote inclued:

A: