RichAuto DSP A18 4 Sumbu Pengendali CNC A18S A18E USB Linkage Sistem Kontrol Gerak untuk Cnc Router Cnc Pengukir
Product Feature
4 axis linkage motion control mode.
Standard configure 8I/O interface board.
Support 9 workpiece coordinates, 8 breakpoints storage positions.
Support mobile calibration & fixed calibration, Tool setting position and speed are configurable.
Support free mark for rotary axis (choose A, B, C)
The fourth axis can be set as a normal axis or a rotary axis.
HIGH/LOW manual speed switching, fine adjusting and distance setting.
Offer system alarms for XYZ axis drivers, inverter, E-stop switch and hard limits.
Support tool broken continue, breakpoint resume, Intelligent power failure recovery.
Support special processing requirements such as array work, mill plane, zoom and part work
Stop position and status can be set as user’s requested.
Product Parameters
Product Model | RichAuto----A18 |
CPU | DSP |
Internal Memory | 512MB |
Display Screen | 128*64 Monochrome LCD |
Communication Port | U disk、USB cable |
Controlled Axis Number | 3 axis |
Control Signal | differential signal |
Drive System | step motor/servo motor |
Min.Input Unit | 0.001mm |
No Volt Protection | support |
Breakpoint Processing Function | support |
External Power Supply Voltage | 24V DC |
Manual Mode | Continuous、point move、distance |
Interpolation Way | line、arc、curve |
Soft/Hard Limit | support |
Max. Pulse Frequency | 1M/S |
Password Protection | support |
Support Language | simple Chinese/traditional Chinese、English、other languages |
Standard Configuration | (1) DSP Handle;(1) 50 core cable (1)USB cable; (1)8 I/O Wiring board;(1) data CD |
Certification : CE
Motor Type : Stepper Motor
Screen Size : 3 inch monochrome screen
Model Number : A18E
Origin : Mainland China
ControlI/O : 8I/8O