Description

VXDIAG Mini VCI J2534 Diagnostic tool For Toyota it3 TIS V15 WIFI auto diagnostic scanner VCX NANO For Lexus OBD2 Car tools

VXDIAG VCX NANO device is an professional diagnostic tool for Toyota(12V)

it support car year 2001-2020 for Toyota car.The device also can support to work for Lexus

This OBD2 scanner's advantage is not only support to do the ECU programming, coding,

Brush Hiding function but also can support to do all system diagnosis, various special functions

( Airbag reset, EPB/SAS/BMS/TPMS/DPF,etc),Action test,etc,the function like the original device,

VCX NANO can do good diagnostic with original software for TIS

Notice：We are not support to provide the original software,

please buy it in the legal channels.If you have any question,

please feel free to contact us,Thank you.

All system diagnostic function

The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live datafor various vehicle control systems, such as ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system,Light system, Wiper System etc.

*EPB (Electrical Park Brake system):

Help to maintain the electronic braking system safely and effectively, deactivating and activating the brake control system, assist with brake fluid control, opening and closing brake pads and setting brakes after disc or pad replacement, etc.

*SAS(Steering Angle Sensor) :

Support to perform calibration for the Steering Angle Sensor which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.

*TPMS (Tire Pressure Monitoring System):

Suppot to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.

*ABS(Antilock Brake System)

Perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System.

*ECU(Electronic Control Unit)

Reading the retrieved ECU information in detail.

*DPF Regeneration(Diesel Particulate Filter) :

Support to carry out numerous functions to the Diesel Particulate Filter system.

*BMS (Battery Maintenance System:

Re-match the control module and motoring sensor for battery detecting more accurately,clear original low battery information and prevent the related control module from detecting false information.

And Many More system…

*ECU Programming and coding function

1.The VCX NANO scanner support to program ECU and fix software controlled driving performanceand emission issues

2.Programming:you can download new software version from the online server database and reprogram it to the ECU.

3.Coding:program adaptive data for car control modules after repair or replacement of vehicle part.

4.Support to do online programming and coding.

Notice:We are not support to provide the online account

*VCX NANO Support J2534 protocol

--Standard OBD2 automotive diagnostic equipment, support J2534 and ISO 2290 PDU protocols

*WIFI/USB Connection

--The device need to work with laptop,you can connect the device to your laptop via the USB cable or WIFI,It supports WIFI and USB communication to transmit the vehicle data to the laptop via the diagnostic software.

*Computer windows system requirement

--Support to work on windows 7 and windows 10 system(not support Home system)

*Free to update device license and firmware

--The device include the license,you are not need to pay the license again,if the license time was expried,you can directly update it in our driver app'VX-Manager".

VCX NANOSupport Various special function

For various scheduled service and maintenance include Maintenance Light Reset, throttle learning, steering angle learning, brake pad reset, tire pressure reset, ABS exhaust,battery matching,gear information learning,injector coding, DPF regeneration,headlight matching, gearbox learning, suspension matching ,Sunroof initialization, A/F adjustment, electronic pump start, release transportation mode, tire modification, door and window calibration, urea reset, NOx reset,start-stop setting, language setting, seat calibration, shielding failure, etc.

*Oil Lamp,Oil Reset*Oil Lamp,Oil Reset

This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.

*Electronic Parking Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

*Steering Angle Calibration

Helping clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

*ABS Bleeding

This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).

*Tire Pressure Monitor System Reset

This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.

*Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

*Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off

*Battery Maintenance System Reset

allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

*Diesel Particulate Filter (DPF) Regeneration

specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

*Electronic Throttle Position Reset

This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.

*Gearbox Matching

1. This function can complete the gearbox self-learning to improve gear shifting quality.

2. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.

*AFS (Adaptive Front-lighting System) Reset

This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lightingangle while monitoring the vehicle speed and body posture.

*Sunroof Initialization

This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.

*Suspension Calibration

1. This function can adjust the height of the body.

2. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.

And many more function..

*VCX NANO Full OBD2 Function

1.Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs).

2.Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

3.I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

4.Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

5.View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

6.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

7.On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.

8.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

*AUTO Read VIN:

Quickly to read vehicle vin and run diagnostic on the selected system that allows technicians or repairmen to easily identify vehicle information,

such as manufacturer model,year and place of manufacture, etc.

*Action Test function:

Active Test The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialization, thus saving diagnostic time.

Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.

Supprot Multi-Language:

Chinese,English, French,Italian, Spanish, German

Package list:

1X PCS VCX NANO Device

1X USB Original Cable

1X Original Box